FiberNewProducts

Product Description
E1 PDH Multiplexer can combine up to 16E1 and 2-ports Ethernet (10/100Mbps line speed) signals in one fiber channel to transmit.It is suitable for low capacity, point-to-point application of remote transmission. The circuit part of the equipmentis fully digitized. The whole equipment is reliable, stable, easy to install and maintain. It has good temperature and voltage characteristics, complete alarm functions, one RS232 asynchronous interface and remote loop back functions(from software). The 12-slot chassis VOS-CH02 expand the number of the ports and and be managed by the management system SNMP

Product Feature
Functional Characteristics:
- 6U height, 19′’ Chassis,14 slots
- 12 E1 cards, two redundant slide-in power supply cards
-Compatible with 4E1 8E1 16E1 PDH Multiplexer
-management card supports hot-swap plug
-Management card has one RS232 port for console management, and one RJ45 port for SNMP management
- AC220V,DC48V,DC24V optional

If you are intereested, pls do not hesitate to contact me,

Jessica
Hangzhou Voscom Technology Co.,Ltd
Web: www.voscom.com.cn
Email: jessica@voscom.com.cn
Tel: 86-571-87389389
Fax: 86-571-87389390

Product Description
16E1 PDH Multiplexer can multiplex 16E1 and 2-ports Ethernet (10/100Mbps line speed) signals in one fiber channel to transmit. It is suitable for low capacity, point-to-point application of remote transmission. The circuit part of the equipment is fully digitized. The whole equipment is reliable, stable, easy to install and maintain. It has good temperature and voltage characteristics, complete alarm functions, one RS232 asynchronous interface and remote loop back functions(from software). At the same time, it can be managed from management software.

Product Feature
Functional Characteristics:
–Providing up to 16 E1 channels and 2 optional 10/100Mbps Ethernet channel
–Fiber port bit rate: 150Mbps, up to 120Km distance without repeater
–E1 Line code: HDB3, compliant to G.703, G.823 and G.742.
–E1 channel support both 75ohm & 120ohm impedance
–Ethernet port support 10/100Mbps auto-detection, Full/Half Duplex auto-negotiation
–Ethernet port can transimit VLAN tag
–Complete alarm functions
–Providing an RS232 asynchronous interface
–Supporting the local/remote E1 loop back
–Remote loop back provided by software and hardware
–Providing RS232 port for management, GUI interface
–Standalone,220VAC or -48VDC power supply optional

Product Specification/Models
Technical specification:
Optical Port
Port number: 1-2, support reduntant backup
Bit rate: 150Mb/s+/-50ppm
Wavelength: 1310nm, 1550nm
Distance: 0 - 120Km
Connector: FC/PC

E1 Port
Port number: 16
Bit rate: 2.048Mbps(+/-100ppm)
Impedance: 75ohm and 120ohm
Line Code: HDB3, compliance with ITU-T G.703

Ethernet Port
Port nunber: 2, optional
Speed: 10/100Mbps line speed
Duplex: Half/Full auto-negotiate
Frame Size: 64 - 1536 bytes
MAC address: 1k
MAC aging time: 5mins

Power Supply
Input voltage: When -48V, -40V ~ -60V (DC) is allowed
When ~220V, -175V , ~264V (AC) is allowed.
Overall power : 5W

Operating Environment
Temperature: 0℃ –45℃
Humidity: 95%, no condense

Standalone Size
483mm(L)*44.45mm(W)*200mm(H)
Weight: 2kg

If you are interested, pls do not hesitate to contact me,

Jessica
Hangzhou Voscom Technology Co.,Ltd
Web: www.voscom.com.cn
Email: jessica@voscom.com.cn
Tel: 86-571-87389389
Fax: 86-571-87389390

Product Description
8E1 PDH Multiplexer can multiplex 4E1 or 8E1 and 2-ports Ethernet (10/100Mbps line speed) signals in one fiber channel to transmit. It is suitable for low capacity, point-to-point application of remote transmission. The circuit part of the equipment is fully digitized. The whole equipment is reliable, stable, easy to install and maintain. It has good temperature and voltage characteristics, complete alarm functions, one RS232 asynchronous interface and remote loop back functions(from software). At the same time, it can be managed from management software.

Product Feature
Functional Characteristics:
–Providing up to 8 E1 channels and 2 optional 10/100Mbps Ethernet channel
–Fiber port bit rate: 150Mbps, up to 120Km distance without repeater
–E1 Line code: HDB3, compliant to G.703, G.823 and G.742.
–E1 channel support both 75ohm & 120ohm impedance
–Ethernet port support 10/100Mbps auto-detection, Full/Half Duplex auto-negotiation
–Ethernet port can transimit VLAN tag
–Complete alarm functions
–Providing an RS232 asynchronous interface
–Supporting the local/remote E1 loop back
–Remote loop back provided by software and hardware
–Providing RS232 port for management, GUI interface
–Standalone,220VAC or -48VDC power supply optional

Product Specification/Models
Technical specification:
Optical Port
Port number: 1-2, support reduntant backup
Bit rate: 150Mb/s+/-50ppm
Wavelength: 1310nm, 1550nm
Distance: 0 - 120Km
Connector: FC/PC

If you are intereested, pls do not hesitate to contact me,

Jessica
Hangzhou Voscom Technology Co.,Ltd
Web: www.voscom.com.cn
Email: jessica@voscom.com.cn
Tel: 86-571-87389389
Fax: 86-571-87389390

Product Description
4E1 PDH Multiplexer can multiplex 4E1 and 2-ports Ethernet (10/100Mbps line speed) signals in one fiber channel to transmit. It is suitable for low capacity, point-to-point application of remote transmission. The circuit part of the equipment is fully digitized. The whole equipment is reliable, stable, easy to install and maintain. It has good temperature and voltage characteristics, complete alarm functions, one RS232 asynchronous interface and remote loop back functions(from software). At the same time, it can be managed from management software.

If you are intereested, pls do not hesitate to contact me,

Jessica
Hangzhou Voscom Technology Co.,Ltd
Web: www.voscom.com.cn
Email: jessica@voscom.com.cn
Tel: 86-571-87389389
Fax: 86-571-87399390

Email: jessica@voscom.com.cn

Web: www.voscom.com.cn

Product Description
VOSCOM DVI Optical Multiplexer can transmit high clarity computer video signals through single core or four cores, single-mode or multi-mode fiber cables. The return loop of the transmitter is applied to local computer monitor. The receiver has an output port. The LED indicators display the transmitter and receiver’s status of power, video and optical signal.

VOSCOM DVI Optical Multiplexer, a flexible professional solution for long distance transmission of high resolution computer video signals. Applications include specialized A/V, Security Systems, Universities, Industrial Monitoring and large-scale conference sites including Stadiums, where long distance transmission of computer video signals are necessary. Fiber optic transmission ensures high quality signals with no interference.
Product Feature
Functional Characteristics:
– 1.6GHz video bandwidth
– High supports RGB analysis to reach1600×1200
– Support brightness, contrast gradient adjustment
– Support sampling clock frequency control
– Support sampling clock phase adjustment
– High accuracy PCR adjusts, the average PCR vibration usually maintains at20~60ns
– The entire real-time high grade transmission, does not have retards
– The farthest transmitting range may reach 40Km
– Supports hotly inserts pulls out the function
Product Specification/Models
Technical specification:
Video
– Specification: RGB belt independent synchronization H and V
– Video bandwidth: 1.6GHz
– DVI coupling: DVI-D
– Resolution: Support640×480 to1600×1200(UXGA)

Optical Port :
– Optical Wavelength：850nm/1310nm/1550nm optional
– Optical connector：LC(standard),FC,SC optional
– Receiver Sensitivity：< -35dBm
– Optical fiber quantity：single，four optional

Others：
– Operating temperature: -40℃~85℃
– Relative Humidity: 0~95%
– Power: 220V,-48V optional
– Size: 120mm×110mm×45mm
       480mm×260mm×180mm

If you are intereested, pls do not hesitate to contact me,

Jessica
Hangzhou Voscom Technology Co.,Ltd
Web: www.voscom.com.cn
Email: jessica@voscom.com.cn
Tel: 86-571-87389389
Fax: 86-571-87389390

Email: jessica@voscom.com.cn

Web: www.voscom.com.cn

Product Description
VOSCOM VGA Optical Multiplexer can transmit high clarity computer video signals through single core or four cores, single-mode or multi-mode fiber cables. The return loop of the transmitter is applied to local computer monitor. The receiver has an output port. The LED indicators display the transmitter and receiver’s status of power, video and optical signal.

VOSCOM VGA Optical Multiplexer, a flexible professional solution for long distance transmission of high resolution computer video signals. Applications include specialized A/V, Security Systems, Universities, Industrial Monitoring and large-scale conference sites including Stadiums, where long distance transmission of computer video signals are necessary. Fiber optic transmission ensures high quality signals with no interference.
Product Feature
Functional Characteristics:
– 400 MHz video bandwidth
– High supports RGB analysis to reach1600?200
– Support brightness, contrast gradient adjustment
– Support sampling clock frequency control
– Support sampling clock phase adjustment
– High accuracy PCR adjusts, the average PCR vibration usually maintains at20~60ns
– The entire real-time high grade transmission, does not have retards
– The farthest transmitting range may reach40Km
– Supports hotly inserts pulls out the function
Product Specification/Models
Technical specification:
Video
– Specification: RGB belt independent synchronization H and V
– Video bandwidth: 400 MHz
– DVI coupling: HD-15 (VGA)
– Resolution: Support640?80 to1600?200(UXGA)

Optical Port :
– Optical Wavelength：850nm/1310nm/1550nm optional
– Optical connector：LC(standard),FC,SC optional
– Receiver Sensitivity：< -35dBm
– Optical fiber quantity：single，four optional

Others：
– Operating temperature: -40~85°C
– Relative Humidity: 0~95%
– Power: 220V,-48V optional
– Size: 120mm*10mm*5mm
       480mm*60mm*80mm

If you are intereested, pls do not hesitate to contact me,
Jessica
Hangzhou Voscom Technology Co.,Ltd
Web: www.voscom.com.cn
Email: jessica@voscom.com.cn
Tel: 86-571-87389389
Fax: 86-571-87389390

Product Description
VOS-CH06 chassis for video optical Transmitter/Receiver series,It is compatible with 1-channel video module, 2-channel video module,4-channel video module and 8-channel video module(two slots).VOS-CH06 chassis can be extensively used in traffic, police, CIQ, petroleum, etc.

Product Feature
Functional Characteristics:
- 4U height, 19′’ Chassis,18 slots
- 16 Digital Video Optical cards, two redundant slide-in power supply cards
- AC220V,DC48V,DC24V optional

Product Description
VOS-1600 16 channels Optical Transmitter and Receiver is one of the series optical transmitters and receivers, which can sustain the transmission of video of 16 channels ,multiplexing Audio Frequency and digitals through optical fibers. The users can adjust the configuration ,if necessary. The function of thunder-resistance and operation and maintenance provides the reliable support for normal operation of the facility.

Product Feature
Functional Characteristics:
- 16 channels video transmission
- Support multiplex communication format, RS-232,RS-422,RS-485(line 2/4)
- Whole digital, unsqueezed, without scathe, radio class transmission
- Compatible to PAL,NTSC,SECAM Video system
- PP connecting type
- Thunder-Resistance
- Net view
- Support Rack hot plug
- Max Transmission Distance 60 kilometers

Product Specification/Models
Technical specification:
Video
Video channel 16
Video Input 1volt Positive-Negative peak voltage (75 Ohm)
Wideband video 5Hz-10MHz
Differential Gain < 2%
Differential phase < 0.7°
Gradient < 1%
Signal Noise Ratio >67dB
Acceptation sensitivity -34dbm
Operating Model unilateralism

Audio
Audio channel 1~4
Frequency of Sampling 32KHz
Operating Model Unilateralism/duplexing

Data Interface
Data Channel 1~4
Data Interface RJ-45
Data format NRZ
Communication speed ≤ 300Kbps
Operating Model simplex, full duplex

Electrical Source condition
Power 220V,-48V,+24V,+12V optional
Current Protection Automatic resume amperite
Size 486x 138 x 44 mm
Working Temperature -45℃~+75℃
Relative Humidity 0%~95%

If you are intereested, pls do not hesitate to contact me,
Jessica
Hangzhou Voscom Technology Co.,Ltd
Web: www.voscom.com.cn
Email: jessica@voscom.com.cn
Tel: 86-571-87389389
Fax: 86-571-87389390

Product Description
VOS-1200 12 channels Optical Transmitter and Receiver is one of the series optical transmitters and receivers, which can sustain the transmission of video of 12 channels ,multiplexing Audio Frequency and digitals through optical fibers. The users can adjust the configuration ,if necessary. The function of thunder-resistance and operation and maintenance provides the reliable support for normal operation of the facility.

If you are intereested, pls do not hesitate to contact me,
Jessica
Hangzhou Voscom Technology Co.,Ltd
Web: www.voscom.com.cn
Email: jessica@voscom.com.cn
Tel: 86-571-87389389
Fax: 86-571-87389390

Product Description
VOS-8000 8 channels Optical Transmitter and Receiver is one of the series optical transmitters and receivers, which can sustain the transmission of video of 8 channels ,multiplexing Audio Frequency and digitals through optical fibers. The users can adjust the configuration ,if necessary.
The function of thunder-resistance and operation and maintenance provides the reliable support for normal operation of the facility. VOS-8000 Optical Transmitter and Receiver can be extensively used in traffic, police, CIQ, petroleum, etc

If you are intereested, pls do not hesitate to contact me,
Jessica
Hangzhou Voscom Technology Co.,Ltd
Web: www.voscom.com.cn
Email: jessica@voscom.com.cn
Tel: 86-571-87389389
Fax: 86-571-87389390

Product Description
VOS-6000 6 channels Optical Transmitter and Receiver is one of the series optical transmitters and receivers, which can sustain the transmission of video of 6 channels ,multiplexing Audio Frequency and digitals through optical fibers. The users can adjust the configuration ,if necessary.
The function of thunder-resistance and operation and maintenance provides the reliable support for normal operation of the facility. VOS-6000 Optical Transmitter and Receiver can be extensively used in traffic, police, CIQ, petroleum, etc

VOS-5000 5 channels Optical Transmitter and Receiver is one of the series optical transmitters and receivers, which can sustain the transmission of video of 5 channels, multiplexing Audio Frequency and digitals through optical fibers. The users can adjust the configuration, if necessary.
The function of thunder-resistance and operation and maintenance provides the reliable support for normal operation of the facility. VOS-5000 Optical Transmitter and Receiver can be extensively used in traffic, police, CIQ, petroleum, etc
Functional Characteristics:
- 5 channels video transmit
- Support multiplex communication format, RS-232,RS-422,RS-485(line 2/4)
- Whole digit, unsqueezed, without scathe, radio class transmission
- Compatible to PAL,NTSC,SECAM Video system
- PP connecting type
- Thunder-Resistance
- Net view
- Support Rack hot plug
- Max Transmission Distance 60 kilometers
Technical specification:
Video
Video channel 5
Video Input 1volt Positive-Negative peak voltage (75 Ohm)  
Wideband video 5Hz-10MHz
Differential Gain < 2%  
Differential phase < 0.7°
Gradient < 1%  
Signal Noise Ratio >67dB
Acceptation sensitivity -34dbm
Operating Model duplexing
Audio
Audio channel  1~4
Frequency of Sampling 32KHz
Operating Model Unilateralism/duplexing
Data Interface
Data Channel 1~4
Data Interface RJ-45
Data format NRZ
Communication speed ≤ 300Kbps  
Operating Model simplex, full duplex
Electrical Source condition
Power 220V,-48V,+24V,+12V optional
Current Protection Automatic resume amperite
Size 210 x 136 x 47 mm ,486x 138 x 44 mm  optional
Working Temperature -45℃~+75℃

Relative Humidity 0%~95%

If you are interested, pls do not hesitate to contact me,

Jessica

Hangzhou Voscom Technology Co.,Ltd
Web: www.voscom.com.cn
Email: jessica@voscom.com.cn
Tel: 86-571-87389389
Fax: 86-571-87389390

VOS-4000 4 channels Optical Transmitter and Receiver is one of the series optical transmitters and receivers, which can sustain the transmission of video of 4 channels ,multiplexing Audio Frequency and digitals through optical fibers. The users can adjust the configuration ,if necessary. The function of thunder-resistance and operation and maintenance provides the reliable support for normal operation of the facility.

VOS-3000 3 channels Optical Transmitter and Receiver is one of the series optical transmitters and receivers, which can sustain the transmission of video of 3 channels ,multiplexing Audio Frequency and digitals through optical fibers. The users can adjust the configuration ,if necessary. The function of thunder-resistance and operation and maintenance provides the reliable support for normal operation of the facility.

Functional Characteristics:
- 3 channels video transmission
- Support multiplex communication format, RS-232,RS-422,RS-485(line 2/4)
- Whole digital, unsqueezed, without scathe,radio class transmission
- Compatible to PAL,NTSC,SECAM Video system
- PP connecting type
- Thunder-Resistance
- Net view
- Support Rack hot plug
- Max Transmission Distance 80 kilometers
Technical specification:
Video
Video channel 3
Video Input 1volt Positive-Negative peak voltage (75 Ohm) 
Wideband video 5Hz-10MHz
Differential Gain < 2% 
Differential phase < 0.7°
Gradient < 1% 
Signal Noise Ratio >67dB
Acceptation sensitivity -34dbm
Operating Model unilateralism
Audio
Audio channel  1~4 
Frequency of Sampling 32KHz
Operating Model Unilateralism/duplexing
Data Interface
Data Channel 1~4
Data Interface RJ-45
Data format NRZ
Communication speed ≤ 300Kbps 
Operating Model simplex, full duplex
Electrical Source condition
Power 220V,-48V,+24V,+12V optional 
Current Protection Automatic resume amperite
Size 210 x 136 x 22 mm 
Working Temperature -45℃~+75℃
Relative Humidity 0%~95%

 

If you are interested, pls do not hesitate to contact me,
Jessica

Hangzhou Voscom Technology Co.,Ltd
Web: www.voscom.com.cn
Email: jessica@voscom.com.cn
Tel: 86-571-87389389
Fax: 86-571-87389390

VOS-2000 2 channels Optical Transmitter and Receiver is one of the series optical transmitters and receivers, which can sustain the transmission of video of 2-4 channels ,multiplexing Audio Frequency and digitals through optical fibers. The users can adjust the configuration ,if necessary. The function of thunder-resistance and operation and maintenance provides the reliable support for normal operation of the facility.
Functional Characteristics:
- 2 channels video transmission
- Support multiplex communication format, RS-232,RS-422,RS-485(line 2/4)
- Whole digital, unsqueezed, without scathe,radio class transmission
- Compatible to PAL,NTSC,SECAM Video system
- PP connecting type
- Thunder-Resistance
- Net view
- Support Rack hot plug
- Max Transmission Distance 80 kilometers
Technical specification:
Video
Video channel 2 
Video Input 1volt Positive-Negative peak voltage (75 Ohm) 
Wideband video 5Hz-10MHz
Differential Gain < 2% 
Differential phase < 0.7°
Gradient < 1% 
Signal Noise Ratio >67dB
Acceptation sensitivity -34dbm
Operating Model duplexing
Audio
Audio channel  1~4 
Frequency of Sampling 32KHz
Operating Model Unilateralism/duplexing
Data Interface
Data Channel 1~4
Data Interface RJ-45
Data format NRZ
Communication speed ≤ 300Kbps 
Operating Model simplex, full duplex
Electrical Source condition
Power 220V,-48V,+24V,+12V optional
Current Protection Automatic resume amperite
Size 210 x 136 x 22 mm
Working Temperature -45℃~+75℃

Relative Humidity 0%~95%

If you are interested, pls do not hesitate to contact me,
Jessica
Hangzhou Voscom Technology Co.,Ltd
Web: www.voscom.com.cn
Email: jessica@voscom.com.cn
Tel: 86-571-87388389
Fax: 86-571-87389390

VOS-1000 is one of the series single channel optical transmitters and receivers , which can sustain the transmission of single channel video, multiplexing Audio Frequency and digitals through optical fibers. The users can adjust the configuration, if necessary. The function of thunder-resistance and operation and maintenance provides the reliable support for normal operation of the facility.
Functional Characteristics:
- single channel video transmission
- Support multiplex communication format, RS-232,RS-422,RS-485(line 2/4)
- Whole digital, unsqueezed, without scathe, radio class transmission
- Compatible to PAL,NTSC,SECAM Video system
- PP connecting type
- Thunder-Resistance
- Net view
- Support Rack hot plug
- Max Transmission Distance 80 kilometers
 
Technical specification:
Video
Video channel 1 
Video Input 1volt Positive-Negative peak voltage (75 Ohm)
Wideband video 5Hz-10MHz
Differential Gain < 2%
Differential phase < 0.7°
Gradient < 1% 
Signal Noise Ratio >67dB
Acceptation sensitivity -34dbm
Operating Model duplexing
 
Audio
Audio channel  1~4
Frequency of Sampling 32KHz
Operating Model Unilateralism/duplexing
Data Interface
Data Channel 1~4
Data Interface RJ-45
Data format NRZ
Communication speed ≤ 300Kbps 
Operating Model simplex, full duplex
Electrical Source condition
Power 220V,-48V,+24V,+12V optional
Current Protection Automatic resume amperite
Size 210 x 136 x 22 mm 
Working Temperature -45℃~+75℃
Relative Humidity 0%~95%

If you are interested, pls do not hesitate to contact me,
Jessica
Hangzhou Voscom Technology Co.,Ltd
Web: www.voscom.com.cn
Email: jessica@voscom.com.cn
Tel: 86-571-87389389
Fax: 86-571-87389390