Fiber optic new product announcements. Register and submit an announcement.
[An optoXchange website.]
| DXL series optic fusion unit body, maximum make the optic fiber forming, connection and wiring to be high density while offer the best protection for the cable and can be independence fusion connection unit which install in 19 inch standard stander. Feature: Modularize design, frontal operation. Integrate fusion and wiring, maximum high density. Can install in 19 inch standard stander. Suitable for ribbon and non-ribbon cable. Can install many kinds of adapter, such as FC, SC, ST and LC, etc. The adapter and equipment use 30 degree card connecting installment, which ensure the jumping wire’s curvature radius and can avoid the laser to burn eyes. Easy operation, complete protection. The optic fiber and pigtailed all have above 2m saving space. Function target: Environment temperature: -40~ 60 Atmospheric pressure: 70Kpa~106Kpa RH: 40dB; UPC type: >50dB; APC type: >60dB The push-pull durability lifetime of optic connector is greater than 1000 times. Contact person: Ms. Dailian Phone +86 755 27338117 Email: hnxuxilian@yahoo.com.cn MSN: Dailian80@hotmail.com http://www.dailianxu.com |
The RGB-5000 from Multidyne provides a long haul, transport solution for high-quality, up to 1600 by 1200, high-resolution, RGB or VGA video sources via ONE fiber. The RGB-5000 performs a horizontal gen-lock for a fully synchronous and jitter free high resolution video transport. The system has been upgraded to support a higher quality image at higher resolutions such as 1600 by 1200. The Video and Synch jitter has been reduced to as low as 4 to 5 nano seconds. The net result is a crystal clear image at all resolutions and refreshes rates. The improvements have also extended the operational temperature range to -20 to 60 degrees C.
The RGB-5000 provides a total analog bandwidth of up to 600 MHz. The system 1600 by 1200 pixels are supported over ONE optical fiber. The supports standards include RGB, XVGA, SVGA, UXGA, Component and Analog HDTV signals.
The RGB-5000 has a data throughput of 3.125 Giga Bits per second. Most systems have a 1.25 Gb/s data throughput with 60% compression.
The system automatically detects the Horizontal and Vertical Sync configuration with support for sync on green, CS sync and separate HS and VS sync inputs. The RGB-5000 supports all possible sync configurations with just ONE fiber. Most systems require up to 5 fibers to support all possible sync configurations.
Fiber optic transport provides the capability for the separation of a video signal source and the monitor. For example, a computer or imaging device can be in a different location than the monitors. In many applications space is limited in the monitor area. With flat screen technology, very little space is required. The computers or imaging devices can be in another room. Systems are available to transport RGB video as well as audio, keyboard and mouse control. Application include commodity and stock exchanges, medical and MRI displays, advertising and signs, sporting and concert video displays, video walls, digital cinema, radar displays, air traffic control, military information displays plus many more…
Daisy-chain one RGB/UXGA source to multiple monitors with the NEW MultiDyne RGB-5000-DC RGB/UXGA Fiber Optic Transport Systems with Daisy-Chain. The receiver unit includes an optical repeater to re-transmit the optical RGB/UXGA signal to the next monitor in the chain. Distribute one High Resolution, RGB/UXGA Video signal from one point to multiple points.
Now the user can distribute a high resolution video signal using one fiber optic transmitter to many receivers. The user now can save the cost of duplicate transmitter units, passive and active splitters and add/drop devices. Each RGB-5000-FRX-DC receiver unit includes a fiber optic input and output. Internally the fiber optic input is decoded for the local monitor and then repeated for re-transmission to the next monitor in the chain. The system can virtually repeat a high resolution video signal indefinitely.
The RGB-5000-ET RGB/UXGA Fiber Optic Transport Systems with Ethernet and Data is the latest addition to the Multidyne RGB-5000 Series. Distribute one High Resolution, RGB/UXGA Video signal with 10-BaseT Ethernet and RS232, RS422 or RS485 bi-directional data. The RGB-5000 provides a jitter-free, long haul, transport solution for high-quality, 1900 by 1600, RGB/UXGA via ONE fiber.
Now the user can control the monitor or project from a remote distance. The a high resolution video signal, monitor remote control and network data can now be transported via fiber cable for distances of 200 meters to 40 Kilometers.
For product information and sales, please call MULTIDYNE at 1-(800)-4TV-TEST, 1-(516)-671-7278, FAX 1-(516)-671-3362 or write to the above address. Visit our Web Site at http://www.multidyne.com or send E-Mail to sales@multidyne.com.
Please download a photo at http://www.multidyne.com/pdf/rgb5000frt2.jpg
Please download a data sheet at http://www.multidyne.com/rgb2000.html
5 to 1485 MBps, Multirate, DVB/ASI, SDI & HD-SDI Fiber Optic Transport Link, HD-1500 Series
MULTIDYNE has introduce the NEW HD-1500 Series of 5 to 1485 MB/Sec Serial Digital Video Fiber Optic Transport Link. The product line is intended to ease the engineering and financial difficulties associated with the migration to Digital and High Definition Television. The HD-1500 line will provide an economical solution for the fiber optic transport and distribution of virtually any digital signal from 5 Mbps to 1.5Gbps. The supported standards include SMPTE 292M 1.485 Gbps, SMPTE 259M with operation from 143Mbps - 360Mbps, SMPTE 310M 19.4Mbps, M2S or DVB-ASI 270Mbps, SMPTE 344M 540Mbps and SMPTE 305M SDTi rates.Download this press release at www.multidyne.com/pdf/pressHD1500.pdf
Download a data sheet at http://www.multidyne.com/hdtv.html
Photos: www.multidyne.com/images/HD1500-FRT-NEW.jpg
www.multidyne.com/images/HD1500-FRX-REAR.jpg
MultiDyne ® provides fiber optic transport systems for video, audio, SDI, HD-SDI, AES, ethernet, data, PTZ, T1, RGB/VGA, DVI, HDMI, L-Band, IF and CATV; optical multiplexing, CWDM; automatic protection switching; loss detectors with automatic switchover; test signal and character ID generators; video, audio and digital distribution amplifiers; cable equalizers; automatic gain AGC’s; electrical and fiber optic routing switchers; tactical cable assemblies; XLR adapter panels as well as other television accessories.
Applications include broadcast, cable, sports, ENG/SNG, satellite, STL, production, digital cinema, sky-cam, pro-AV, corporate, retail, digital signage, security, surveillance, transportation, government, healthcare, judicial arraignment and teleconferencing.
Among our NEW solutions are the following:
For product information and sales, please call MultiDyne at 1-(877)-MULTIDYNE, 1-(516)-671-7278, FAX 1-(516)-671-3362 or write to the above address. Visit our Web Site at http://www.multidyne.com or send E-Mail to sales@multidyne.com. We welcome the opportunity to do business with your company. Thank you.
Hello, This is Voeray lau from FiberPON Technology.
Found in Dec.2006, Fiberpon technology co.,ltd is an established cost-competitive ISP. Fiberpon specializes in manufacturing, sales and technical services in high performance fiber optical passive and active components and test instruments for optical fiber communication system.
The company supplies a broad range of Optical Fiber Communication Components including, WDM,CWDM and DWDM, FBT Coupler and Splitter, Patch-Cords, Isolator , Transceivers (SFP,SFF,1X9,GBIC,XFP,XenPak, Bidi.)Triplexer, Sub-Modules and Ethernet devices to globally ISP and telecommunications operating companies.
With utilizing the low-cost manufacturing facilities in China and high quality, most devices have been delivered to USA, European countries, Russia, Japan , Korea and other countries. We provide excellent engineering services, customer design , technical support, product view , rapid sample prototyping, and mass production delivering fast to our customer.
Fiberpon insist on the spirit of “The most important Quality, The best quickly delivery”, focusing on the growing the customer relationship to create a win-win outcome, So that satisfy customer’s various requirements better..
Wish Everybody Merry Christmas and Happy New Year.
FiberPON Technology Co.,Ltd
MSN: Voeraylau@gmail.com
Skype: voeray
E-mail: voeraylau@gmail.com
Glimmerglass has unveiled a new version of its intelligent optical switches. The new version, Release 3.0, supports non-blocking, all-optical switching for as many as 320 single-mode fibers in a rack-mountable 8 RU chassis.
The release offers new fiber monitoring configurations, a Japanese language web-based user interface, and enhanced security features.
Lynx Photonic Networks has added an all-optical bypass system to its LightLEADER™ 3000 series of plug-and-play photonic switches. The new LL-300x system is targeted at carriers and service providers in storm-affected areas where electrical wire breakdowns are common and cause power outages in one or more network nodes.
OpTun, Inc a manufacturer of PLC based solutions, announces the introduction of its Lambda Edge 3200. A 1RU pizza box solution, based on its 32 channel PLC ROADM, using its proprietary on-chip design referred to as Controlled Mode Interaction (CMI™).
OpTun’s CMI™ technology is a waveguide design that allows robust and differentiating switch and VOA performance on a Silica-on-Silicon platform. Direct benefits of this CMI™ technology are its high-yielding design, lower electrical power consumption and optical performance over the entire ITU C- and L-band.
[powered by WordPress.]
To post your product announcement, register first, then login, then go to the "Write" tab, paste your announcement, click "publish", and your announcement is now posted.
| by Simple Thoughts | ||||
| M | T | W | T | F | S | S |
|---|---|---|---|---|---|---|
| « Aug | ||||||
| 1 | 2 | 3 | 4 | 5 | ||
| 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| 13 | 14 | 15 | 16 | 17 | 18 | 19 |
| 20 | 21 | 22 | 23 | 24 | 25 | 26 |
| 27 | 28 | 29 | 30 | 31 | ||
22 queries. 1.174 seconds