FiberNewProducts

E1 to 10 / 100Base-T Protocol Converter is a conversion device that can realize the conversion from E1 interface to 10 / 100Base-T interface. Provides 2048Kbit / s date transmission channel for line concentrator or exchanger to combine two LANs into one LANs via transmission apparatus (such as optical transmitter / receiver and so on) and use same IP address. Supports automatic learning MAC address function. Filtrate data package via address list and be transparent in TCP/ IP protocol.
Product Feature
1. Adopts large-scale integrate chip, brief circuit, low power consumption and high reliability structure
2. Offers one channel E1 port and Automatically adapt to 75ohm and 120ohm Impedance
3. Master clock, incept resume clock optional
4. Provides powerful network management functions
5. Possess complete alarm and status indication function
6. Adopts manifold power supply: -48V DC or 220V AC
Technologies reference
7. Interface type: E1, 10 / 100Base-T
8. Bit rate: 2048KBIT / S + -50ppm
9. Transmission end rate: 2048Kbit / S
10. User end rate: 10 / 100Mbit / S
11. E1 impedance: 75ohm (unbalance)  / 120ohm (balance)
12. Clock type: master clock, slave clock optional
13. Dimension: 200mmX140mmX35mm
14. Indicator:
PWR: Power Indicator
LINK: Ethernet Connection Indicator
WTX: WAN Send Date Indicator
WRX: WAN Receive Date Indicator
LTX: LAN Send Date Indicator
LRX: LAN Receive Date Indicator
LOS: E1 Signal Indicator
COL: LAN Signal Indicator
ERR: Wrong Code Indicator
Contact person:Ms. DailianPhone                      +86  755  27338117MSN:                     Dailian80@hotmail.comhttp://www.dailianxu.com